Linear Actuators
Information about Linear Actuators that are used with an Observant system for controlling and automating irrigation systems
- Using Equipment Manager to configure the AWMA iLifter
- Using Equipment Manager to configure the AWMA iRiser
- Gate Motor Controller Fault States
- Linak Actuator — Initializing an Actuator via Monitor
- Linak Actuator - Failed to Start Error
- Linak Actuator - Bad Stop Error
- AWMA iLifter - Check Configuration Error
- AWMA iLifter - Jammed Error
- Linak Actuator - Stopped Due to Low Voltage Error
- AWMA iRiser - Jammed Error
- Why does my iRiser report Jammed although it has closed fully?
- AWMA iRiser - Check Configuration Error