Technical Note — Jain Logic Pulse – Help Desk

Description

Jain Logic Pulse monitors the key performance elements of your pump and filter station to ensure it’s performing as expected, highlighting problem areas and reporting water use.

Pressure sensors are installed pre and post filter and coupled with the system's flow meter.
Data is collected and analyzed for insight into system performance and health.
Daily emails provide detailed operational information.
Weekly emails are setup to deliver water use and system health trends.

Applications

Pulse intelligently works in the background, monitoring the pump and filter station tracking pre and post filter pressures, system flow and irrigation events. Pulse will provide regular reporting of water use, irrigation events, pressure variances and system health and deliver it via email.

Filter Station

Pre and Post Filter Pressure
Pre and Post Filter Pressure Differential

Flow Meter

Total Applied Water - by event, week and season

Irrigation Event Logs

Weekly Trends for All Monitored Performance Inputs
Start Time, End Time, Run Time and Applied Water
High Pressure Alert

Supported Models

Pressure Sensor

OsiSense Pressure Sensor

Pulse Output Flow Meter

Seametrics AG2000
Seametrics AG3000
McCrometer MAG 3000
Other pulse output flow meters utilizing open collector outputs.

Connection to Field Unit Ports

Pre and Post Filter Pressure

The Pre Filter Pressure Sensor's bare wires should be connected to the Output 1 port of the C3:

C3 Port Terminal	Sensor Wire Colour
Output 1	Brown
Ground	Blue

The Post Filter Pressure Sensor's bare wires should be connected to the Output 2 port of the C3:

C3 Port Terminal	Sensor Wire Colour
Output 2	Brown
Ground	Blue

Flow Meter

The Flow meter's bare wires should be connected to the Input 1 port of the C3:

C3 Port Terminal	Sensor Wire Colour
Input 1	Green
Ground	White

Product Support Pages